A-A-865C
2.4 Inside diameter and inside length shall be as specified. (See Section 7). The tolerance on the inside diameter shall be +/- 0.79 millimeters (1/32 inch) and on the inside length shall be plus 0.95 centimeters (3/8 inch), minus zero.
2.5 Closure shall be by the use of metal ends, either by crimping or metal screw cap.
2.6 Workmanship- The tube shall be free from any defect that may affect its appearance, performance or use.
3. RECOVERED MATERIALS:
The contractor shall certify that the product offered shall include a minimum of 80% post consumer recovered material as defined in 40 CFR, part 250. The Government reserves the right to require proof of such conformance.
4. QUALITY ASSURANCE:
Product Conformance: The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.
5. APPLICATION FOR COPIES OF TECHNICAL DOCUMENTS REFERENCED HEREIN:
The issue date in effect on the date of invitation for bids or request for proposal shall apply.
5.1 T-108 Test is available from the Composite Can be Tube Institute, 1630 Duke Street, Alexandria, Va 22314; phone 703-549-2233.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business