INCH-POUND
MIL-DTL-6054G
4 September 2007
SUPERSEDING
MIL-D-6054F
14 May 1987
DETAIL SPECIFICATION
DRUM, METAL-SHIPPING AND STORAGE
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers new cylindrical drums to be used as exterior shipping containers (see 6.1).
1.2 Classification. Drums will be furnished in the dimensions and capacities as specified in the applicable MS standards.
2. APPLICABLE DOCUMENTS.
2.1 General. The documents listed in this section are specified in 3, or 4 of this standard. This section does not include
documents cited in other sections of this standard or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in 3, or 4 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
FEDERAL SPECIFICATION
PPP-C-1120
Cushioning Material, Uncompressed Bound Fiber for Packaging
FEDERAL STANDARD
FED-STD-595/24084
Green, Semigloss
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center Philadelphia, ATTN: DSCP-NASA, 700 Robbins Ave, Philadelphia, PA 19111-5096 or
emailed to dscpg&ispeccomments@dla.mil. Since contact information can change, you may want
to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 8110
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business